All Categories
EN

BLOG

Home > BLOG

  • Problems in the Bucket Tooth Market
    Problems in the Bucket Tooth Market
    2021-11-26

    1. The scale of production is scattered, the cooperation between production enterprises is not enough.There are many production enterprises of bucket tooth products in China, but most of them are smaller enterprises with small production capacity. Du...

    VIEW MORE
  • How to improve the service life of bucket teeth?
    How to improve the service life of bucket teeth?
    2021-11-18

    Part.1
    The bucket tooth of excavator is the parts with the shortest life. It has direct contact with the concave and convex surface. The working conditions are very bad, so it is replaced more frequently and the demand is also very lar...

    VIEW MORE
  • How to improve the service life of bucket teeth?
    How to improve the service life of bucket teeth?
    2021-11-11

    Part.2
    The purity of molten steel can be guaranteed under the condition of vacuum steel-making or vacuum degassing. In addition, attention should be paid to the selection of raw materials, otherwise the thick inclusions; especially those...

    VIEW MORE
  • How to choose bucket teeth?
    How to choose bucket teeth?
    2021-11-04

    How to choose bucket teeth?Bucket teeth generally have the difference between cast bucket teeth and forged bucket teeth. Generally, forged bucket teeth are more wear-resistant and harder. The service life is about twice that of cast bucket teeth, and...

    VIEW MORE
  • How to Improve the Abrasive Resistance of Bucket Teeth?
    How to Improve the Abrasive Resistance of Bucket Teeth?
    2021-10-29

    Bucket TeethDifferent degrees of surface wear will occur on the working surface of the teeth, which in turn will result in a larger depth of the plow ditch leading to the scrapping of the teeth. Therefore, the quality of the wear layer on the surface...

    VIEW MORE
  • Why Should Excavator Install Bucket Teeth?
    Why Should Excavator Install Bucket Teeth?
    2021-10-22

    Bucket Tooth is the end of excavator working device, in the excavation work process, they are the most loaded working parts, belonging to consumable accessories, especially in the stone construction environment, and bucket tooth wear speed is particu...

    VIEW MORE
  • What Materials Are Used For Excavator Bucket Teeth? – Hard Alloy Steel
    What Materials Are Used For Excavator Bucket Teeth? – Hard Alloy Steel
    2021-10-14

    What Materials Are Used For Excavator Bucket TeethManufacturers often use hard alloy steel as the main raw material for production, in order to further enhance the wear resistance of new excavator teeth. Hard alloy steel is an alloy material made of ...

    VIEW MORE
  • The Two Main Structural Forms of Teeth - Straight and Horizontal
    The Two Main Structural Forms of Teeth - Straight and Horizontal
    2021-10-07

    Two Main Structural Forms of Teeth - Straight and HorizontalThe bucket teeth of excavators generally have two types of structure, which are straight mounted and horizontal mounted. The straight type means that the pin shaft is vertically installed wi...

    VIEW MORE
  • Influence of Bucket Tooth Wear on Cutting Force
    Influence of Bucket Tooth Wear on Cutting Force
    2021-10-01

    Influence of Bucket Tooth Wear on Cutting ForceAccording to the abrasion degree of bucket teeth,  we divide the wear of test bucket teeth into three levels: zero level wear, that is, new bucket teeth without abrasion; Intermediate wear, i.e...

    VIEW MORE
TUV